3D Printing Alloy Powder

Nug Hu Rau Peb

Piav qhia

Kuv tias cov txhob yog? Tus tom ntawm rau li cas li!

+86 2131372761

[email protected]

Nug

Piav qhia

Tswv yim ntawm qhov rooj 3D print

Cov neeg cai xyoo tau tawm los qho qhov cai li cas yog ib tug neeg kawg ua rau ntawm peb qab, nyob rau hais tawm los noj qhov kev cai li cas yog ib tug neeg kawg ua rau ntawm peb qab thiab cov khwv txog lawv, thiab yog li cas nrog peb qab thiab cov khwv txog lawv, thiab yog li cas nrog peb qab thiab cov khwv txog lawv, thiab yog li cas nrog peb qab thiab cov khwv txog lawv.

Yam ntxwv
High Sphericity & High Flowability.

Low Oxygen Content. Yog li cas nrog peb qab thiab cov khwv txog lawv 300~800PPM. 

Narrow Particle Size Distribution. 

3D Printing (3).png

specifications

Ntsiav ntsi kawm los tsawg qhov kev cai li cas.
Cov khoom	Cov los rau hauv lawm(%)
Alloy	Cr	Ni	Mo	V	Si	Mn	Nb	C	Fe
316L	16.0-18.0	10.0-14.0	2.0-3.0		≤1.0	≤2.0		≤0.03	Tub
304L	18.0-20.0	8.0-12.0			<1.0	≤2.0		≤0.03	Tub
17-4PH	15.5-17.5	3.0-5.0	Cu:3.0-5.0		≤1.0	≤1.0	0.15-0.45	≤0.03	Tub
420J1	12.0-14.0	≤0.6			≤1.0	≤1.0		0.15-0.25	Tub
430	16.0-18.0				≤0.75	≤1.0		≤0.12	Tub
H13	4.75-5.5		1 1-1.5	0.8-1.2	0.8-1.2	0.2-0.5		0.32-0.45	Tub
M2	3.75-4.5		4.5-5.5	1.75-2.2	0.2-0.45	0.15-0.4	W.5.5-6.75	0.78-0.88	Tub
310S	24.0-26.0	19.0-22.0			<1.5	.≤2.0		0.2-0.45	Tub
S136	12.0-14.0			0.15-0.4	0 8-1.0	≤1.0		0.2-0.45	Tub
CoCrMo	26.5-30.0	≤1.0	4.5-7.0		≤1.0	≤1.0	Cob:Bal	≤0.35	≤1.0

Nyob rau npawb tsis los no los tsawg nyob rau cov xovxwm
Cov khoom	Kev mus	Liquidity (S/50g)	T.D (g⁄cm³)	0.C.ppm (ppm dawb)	Specifications (μm)	Ntim (kg)
316L	Kawg txhais ntsuam	<20	≥5.0	≤600	15-50	5/25/50
17-4PH	Kawg txhais ntsuam	<20	≥5.0	≤600	15-50	5/25/50
M2	Kawg txhais ntsuam	<20	≥5.0	≤600	15-50	5/25/50
In718	Kawg txhais ntsuam	<20	≥4.7	≤600	15-50	5/25/50
In625	Kawg txhais ntsuam	<20	≥4.6	≤600	15-50	5/25/50
AISi12	Kawg txhais ntsuam	<20	≥5.0	≤500	15-50	5/25/50
AISi10Mg	Kawg txhais ntsuam	<20	≥5.0	≤500	15-50	5/25/50